Wearever Incontinence

The liner wicks and absorbs moisture away from the body and locks it in. The center layer is made up of absorbent, odor reducing fiber fill. To prevent leakage, the bottom of the pad is lined with waterproof polyurethane laminate.

All of the Wearever incontinence underwear have a patented 3 layer absorbent fiberfill pad sewn in to the garment designed to support light leaks and small drips that accumulate over the course of the day. The pad will accept 1-2 oz per small leak and is not intended for heavy streams, full voids or total incontinence. Once the pad reaches it’s full capacity, a change is necessary to avoid overflow. We recommend a good snug fit where the sewn in pad fits snug to the body in order to do the intended job.

The non woven fibers are treated with a natural solution that fights odor-causing bacteria.The fibers never come in contact with their body as the fibers are covered with a 50/50 cotton/poly top liner. Rinsing the product in a solution of 50-50 Vinegar to Water solution will help reduce odor if the product is not laundered immediately after use.

The coverage differs depending on the style of the garment. The size of the built-in pad incrementally increases with the amount of liquid the pad can wick away. The regular absorbency pads are roughly the size of a disposable pad. The super pads are larger, going not quite halfway up the front and back panels. The maximums are the largest, going halfway up the front and back panels. For the men’s garments: The pad extends up past the fly on the front side of all styles to ensure proper coverage. The back coverage of the classic is minimal. The back coverage of the super and maximum extends about halfway up the back side of the garment.

Yes, all of our men’s styles have a functioning fly. Since the pad extends higher than the fly, it is necessary to push the pad aside when using the fly.